Free Access
| Issue |
Radioprotection
Volume 51, Number 4, October-December 2016
|
|
|---|---|---|
| Page(s) | 287 - 292 | |
| DOI | https://doi.org/10.1051/radiopro/2016076 | |
| Published online | 12 December 2016 | |
- Busch F., Engelhardt J., Martini E., Lesz J. (2011) A Whole-body Dosimetry system for Personnel Monitoring based on hot-pressed thin layer TLD, Radiat. Prot. Dosim. 144 (1-4), 246-248. [CrossRef] [Google Scholar]
- Christensen P., Bøtter-Jensen L., Ennow K., Majborn B. (1990) Dosemeter Configurations for the Measurement of Hs(0.07) and Hp(10) from Photon, Radiat. Prot. Dosim. 34 (1-4), 111-114. [Google Scholar]
- IAEA (2007) Intercomparison of Personal Dose Equivalent Measurements by Active Personal Dosimeters, Final Report of a joint IAEA-EURADOS Project, IAEA-TECDOC-1564. [Google Scholar]
- ICRP (1996) Conversion Coefficients for Use in Radiological Protection Against External Radiation, ICRP Publication No. 74, Ann. ICRP 26 (3-4). [Google Scholar]
- ICRU (1985) Determination of Dose Equivalents Resulting from External Radiation Sources, Report No 39. ICRU, Bethesda, MD. [Google Scholar]
- ICRU (1993) Quantities and Units in Radiation Protection Dosimetry, Report No. 51. ICRU, Bethesda, MD. [Google Scholar]
- ICRU (1998) Conversion Coefficients for Use in Radiological Protection Against External Radiation, Report No. 57. Pergamon Press, Oxford and New York. [Google Scholar]
- ISO (1996) X and Gamma Reference Radiations for Calibrating Dosemeters and Doserate Meters and for Determining their Response as a Function of Photon Energy, ISO 4037/Part 1: Radiation Characteristics and Production Methods. ISO, Geneva. [Google Scholar]
- ISO (1998a), X and Gamma Reference Radiations for Calibrating Dosemeters and Doserate Meters and for Determining their Response as a Function of Photon Energy, ISO 4037/Part 2: Dosimetry for Radiation Protection over the Energy Ranges 8 keV to 1.3 MeV and 4MeV to 9 MeV. ISO, Geneva. [Google Scholar]
- ISO (1998b) X and Gamma Reference Radiations for Calibrating Dosemeters and Doserate Meters and for Determining their Response as a Function of Photon Energy, ISO 4037/Part 3: Calibration of Area and Personal Dosemeters and the Measurement of their Response as a Function of Energy and Angle of Incidence. ISO, Geneva. [Google Scholar]
- Miljanic S. et al. (2003) Energy dependence of new thermoluminescent detectors in terms of Hp(10) values, Radiat. Prot. Dosim. 106 (3), 253-256. [CrossRef] [Google Scholar]
- Munish K., Kher R.K., Sahni G., Chhokra K. (2008) Studies on the response of the TLD badge for high-energy photons, Radiat. Prot. Dosim. 128 (3), 266-273. [Google Scholar]
- Pradhan A.S., Bakshi A.K. (2002) Calibration of TLD badges for photon energy above 6 MeV and dosimetric intricacies in high energy gamma ray field encountered in nuclear power plants, Radiat. Prot. Dosim., 98 (3), 283-290. [CrossRef] [Google Scholar]
- Vohra K.G., Bhatt R.C., Bhuwan C., Pradhan A.S., Lakshmanan A.R., Shastry S.S. (1980) A Personnel Dosimetry TLD Badge based on CaSO4:Dy Teflon TLD discs, Health Phys. 38, 193-197. [CrossRef] [PubMed] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.