Numéro |
Radioprotection
Volume 53, Numéro 4, October-December 2018
|
|
---|---|---|
Page(s) | 287 - 291 | |
DOI | https://doi.org/10.1051/radiopro/2018036 | |
Publié en ligne | 16 novembre 2018 |
Article
Comparative organ dose levels for dentomaxillofacial examinations performed with computed tomography, cone beam CT and panoramic radiographs
1
Institute of radiation physics, Lausanne University Hospital,
1 rue du Grand Pré,
1007
Lausanne, Switzerland
2
Department of Radiology, University Hospital of Geneva,
4 rue Gabrielle-Perret-Gentil,
1205
Geneva, Switzerland
3
Department of radiology, University of Otago,
Christchurch, New Zealand
* Corresponding author: marta.sansmerce@hcuge.ch
Received:
4
July
2018
Accepted:
29
October
2018
The purpose of this study was to evaluate the radiation dose delivered to radiosensitive organs (thyroid, parotid glands and eye lens) during dentomaxillofacial imaging with multislice computed tomography (CT), cone beam CT (CBCT) and panoramic radiographs (orthopantomography, OPT). The dose was estimated individually for each modality and each clinical protocol by measuring the absorbed dose at the surface of a head phantom with thermoluminescence dosimeters. The measured radiation dose was between 0.01–1.22 mGy for the thyroid gland (systematically outside the primary beam), 1.34–29.11 mGy for the parotid glands (systematically exposed to the primary beam) and 0.02–26.22 mGy for the eye lens (in the primary beam depending on imaging protocol). For all organs, CT was found to be the most irradiating modality followed by CBCT and OPT. However, CBCT with a “limited dental” protocol and OPT deliver similar doses to the parotid glands.
Key words: dentomaxillofacial imaging / cone beam computed tomography / radiation dosimetry / orthopantomography / multislice computed tomography / organ absorbed doses
© EDP Sciences 2018
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.