Issue |
Radioprotection
Volume 14, Number 2, Avril-Juin 1979
|
|
---|---|---|
Page(s) | 89 - 97 | |
DOI | https://doi.org/10.1051/radiopro/19791402089 | |
Published online | 20 August 2017 |
On the use of dental ceramics as a possible second-line approach to accident irradiation dosimetry
Commissariat à l’Énergie Atomique, Département de Protection, Service Technique d’Études de Protection, Section Technique d’instrumentation et de Dosimétrie, 92260 Fontenay-aux-Roses, France.
Recent development in dental ceramic production has resulted in natural or depleted uranium, used for over half a century to mimic the fluorescence of natural teeth, being substituted in such ceramics by non-radioactive fluorescent materials. This creates the possibility of using dental ceramics incorporating the latter as second-line dosimeters in cases of accidental irradiation. This pilot study shows the feasibility of such an approach using both thermally stimulated exoelectron and thermoluminescent techniques. In conclusion, it is considered that it would be of interest to continue this investigation of dental ceramic materials as second-line accident dosimeters.
Abstract
Durant plus d’un demi-siècle la fabrication des céramiques dentaires était réalisée à partir de l'uranium naturel ou appauvri. Ceci avait pour but de simuler la fluorescence naturelle des dents. Le développement récent de la production de nouvelles céramiques tend à substituer à l'uranium des matériaux fluorescents non radioactifs. Cette technologie ouvre la possibilité d’utiliser les prothèses conçues à partir de ces céramiques pour une dosimétrie d’appoint en cas d’irradiation accidentelle. Les résultats préliminaires obtenus montrent que l’on pourrait appliquer les techniques d’émission exoélectro- nique thermostimulées (EETS) et de radiothermoluminescence (RTL). En conclusion, on met en évidence l’intérêt qu’il y aurait à poursuivre l’étude de ces céramiques, utilisées comme « dosimètres secondaires ».
© DUNOD 1979
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.