Numéro |
Radioprotection
Volume 51, December 2016
Innovative integrated tools and platforms for radiological emergency preparedness and post-accident response in Europe. Key results of the PREPARE European research project
|
|
---|---|---|
Page(s) | S67 - S71 | |
Section | Review and investigation of the operational arrangements and procedures − Emergency preparedness for long lasting releases | |
DOI | https://doi.org/10.1051/radiopro/2016035 | |
Publié en ligne | 23 décembre 2016 |
Article
Emergency preparedness for long lasting releases – source terms
1
VUJE, Inc.,
Okružná 5,
918 64
Trnava, Slovakia
2
BfS – Federal Office for Radiation Protection,
Ingolstaedter Landstr. 1,
D-85764
Oberschleissheim, Germany
3
CIEMAT – Department of Environment,
Av. Complutense, 40,
28040
Madrid, Spain
4
Radiation and Nuclear Safety Authority (STUK), Finland,
Säteilyturvakeskus, Finland
The Fukushima-Daiichi nuclear power plant (NPP) accident has demonstrated the possibility of long-lasting releases of radionuclides from a damaged NPP over several weeks. The objective of this paper is to provide long lasting potential environmental source terms (ST) for the typical reactor units that are being in operation in various European countries. The main aim is to provide environmental ST for testing of the current off-site nuclear emergency planning in European countries with accident scenarios based on lessons learned from the Fukushima accident and to derive recommendations how to improve the current planning. There are described the environmental ST's for three, the most frequent, reactor types – Pressurizer Water Reactor (PWR), Boiling Water Reactor (BWR) a and VVER-440 (VVER = Russian acronym for PWR) that are under operation in Germany, Slovakia, Finland and Spain, but they can be considered as typical for NPP's under operation in another European countries, too.
Key words: reactor severe accident scenario / long lasting release / source terms
© EDP Sciences 2016
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.