Liste des revues d'EDP Sciences
Article en accès gratuit

Numéro Radioprotection
Volume 44, Numéro 5, 2009
ECORAD 2008 - Radioecology and Environmental Radioactivity
Page(s) 71 - 76
DOI 10.1051/radiopro/20095019
Publié en ligne 06 Juin 2009

Radioprotection 2009, Vol. 44, n° 5, pages 71 à 76
DOI: 10.1051/radiopro/20095019

Bioavailability of 99Tc to a macrophyte of the Yenisei River

L. Bondareva and A. Bolsunovsky

Institute of Biophysics, Siberian Branch of the Russian Academy of Sciences, 660036 Krasnoyarsk, Russia


Published online: 6 June 2009

Abstract
The experiments on accumulation of 99Tc by Elodea biomass showed that 99Tc activity concentration can reach 120 ± 6 Bq/g, with the concentration factor for 99Tc 2700 ± 500 L/kg. In experiments on 99Tc release, over 504 h about 82% of the total 99Tc activity was released into the water from plant biomass; most of 99Tc was released within the first 192 h. Results of chemical fractionation of the biomass show that 99Tc contained in biomass was mainly concentrated in the exchangeable and the adsorbed fractions (83%). Thus, the data obtained using chemical fractionation of biomass confirmed the experimental data on 99Tc release, which suggested that most of the biomass-bound 99Tc was adsorbed on the biomass surface. 99Tc tightly bound to Elodea biomass (fractions of organics and mineral residue) constituted just 17% of the total 99Tc activity. Decreased illumination of Elodea shoots during the experiment did not cause any reduction in 99Tc activity concentration or concentration factor. Results of chemical fractionation of the biomass grown under lower illumination conditions show that the percentage of 99Tc tightly bound to Elodea biomass (fractions of organics and mineral residue) decreased while the 99Tc of the adsorbed fractions decreased. Our results and data reported by other authors suggest that some part of 99Tc activity can be bioavailable to living organisms and that the portion of bioavailable 99Tc can be determined by a number of factors.



© EDP Sciences 2009


Comment afficher un lien OpenURL ?

La norme OpenURL est un protocole de transmission de métadonnées permettant de décrire la ressource à laquelle vous souhaitez accéder. Il s'agit de construire un lien contenant les métadonnées et pointant vers le serveur OpenURL de votre choix. Ce serveur OpenURL peut alors par exemple indiquer l'accessibilité de la ressource, proposer des services complémentaires (recherche, export de référence...). Un tel lien peut être généré selon des moyens différents :
  • Si la bibliothèque gérant votre abonnement a défini un serveur OpenURL pour ses utilisateurs, les liens OpenURL apparaissent automatiquement sur les pages appelées.
  • Vous pouvez choisir votre propre serveur de liens en paramétrant votre "Compte EDPS" rubrique " Mes données ". Dans ce cas, votre choix sera prioritaire par rapport à celui de votre bibliothèque.
  • Vous pouvez utiliser un module complémentaire pour votre navigateur (Firefox ou I.E.) qui permet d'afficher les liens OpenURL présents dans une page (voir http://www.openly.com/openurlref/). Vous devrez désactiver ce module si vous souhaitez utiliser le serveur OpenURL que vous avez défini ou celui de votre bibliothèque.